|
1-4-2-perednee-sidene.html
1.4.2. Forward seatAdjustment of longitudinal provision of a seat
Pull up the lever of adjustment of a seat and move a seat forward or back in demanded situation. After adjustment release the adjustment lever to fix a seat in new situation.
|
ATTENTION
To be convinced that the seat is reliably fixed, try to move it forward or back, without using the adjustment lever.
|
Adjustment of an inclination of a back of a seat
For change of a tilt angle of a back of a seat bend slightly forward, pull up the lever of fixing of a back of a seat, then bend back in demanded situation and release the lever. The back of a seat will be fixed in this situation.
To reduce risk of receiving a trauma at a road accident or sharp braking, during movement of the car of a back of seats of the driver and the passenger should be in situation whenever possible close to the vertical. When the back of a seat is inclined, efficiency of protection of seat belts can be considerably lowered, and also there is a high probability of that the passenger can slip out from under a seat belt and get serious traumas.
|
ATTENTION
In the mechanism of adjustment of an inclination of a back of a seat there is a spring returning a back in vertical situation if the lever of fixing of a back of a seat is lifted up. Therefore when moving this lever it is necessary to sit as it is possible closer to a back of a seat or to hold with her hand.
|
Adjustment of height of a pillow of a seat (only for a chair of the driver)
The height of a pillow can be adjusted by a raising 1 and lowering 2.
Adjustment of a lumbar podpor (only for a chair of the driver)
The handle of adjustment of a lumbar podpor is located on a back of a seat of the driver.
1. Strong support.
2. Weak support.
|