Three-dot seat belt (with the inertial mechanism of blocking). Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
1.1. Car description
1.2. Keys, locks of doors and opening elements of a body
1.3. Governing bodies, kontrolnoizmeritelny devices and salon equipment
1.4. Seats
1.5. System of passive safety
1.5.1. Seat belts
1.5.2. A three-dot seat belt (with the inertial mechanism of blocking)
1.5.3. System of a preliminary tension of seat belts (prednatyazhitel)
1.5.4. Children's seat
1.5.5. Fastenings for the children's holding adaptation (a children's seat)
1.5.6. Installation of the holding adaptation for children (a children's seat) with its attachment to the bottom anchor fastenings of back seats (children's seats with system of fastening of ISOFIX)
1.5.7. The holding adaptation for children (a children's seat) with system of fastening of ISOFIX
1.6. Sitema of heating and conditioning
1.7. Driving and car service
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes


1.5.2. A three-dot seat belt (with the inertial mechanism of blocking)

The belt of this type does not demand adjustment on length. After putting on of such belt it automatically follows movements of your body, but in case of sudden or strong breakthrough the belt is automatically blocked for deduction of the person fastened by it.

Pristegivaniye of a seat belt
Extend a belt slowly and smoothly, holding it for a level (a latch uvula).
Slightly tighten a belt to eliminate its sagging.

If the seat belt cannot be extended outside because it appeared blocked, pull with force for a belt once and release it. After that try to extend smoothly once again a belt.

Insert a belt level (a latch uvula) into its lock before click.

Never put on a seat belt across an abdominal cavity. Such arrangement of a belt in case of failure increases risk of receiving a trauma since the belt can sharply run into a stomach.

The fastened seat belts should not be overwound.

Otstegivaniye of a seat belt
Undertake a level (a latch uvula) and press the button on the belt lock.

As the belt will be automatically cleaned, hold a latch uvula that the belt was involved smoothly. Default of this rule can lead to car damage.

Adjustable fastenings of seat belts (forward seats)
The height of fastening of a seat belt can be adjusted. Fastening of a belt can be moved down, holding pressed the blocking button A. to move belt fastening up, it is not necessary to press the blocking button A.

Regulating seat belt fastening, establish it at sufficient height to provide dense contact of a belt to a shoulder and during too time that the belt did not touch a neck.

Storage of seat belts of back seats
When a seat belt of a back seat are not used, store it, as is shown in drawing.
For storage of seat belts when they are not used, it is also possible to use special fastenings And.
Stretch a belt through an internal groove of fastening, and then, insert a uvula of a latch to an external groove of fastening.

System of a preliminary tension of seat belts and limiter of effort of breakthrough
Seats of the driver and the forward passenger are equipped with seat belts which have the mechanism of a preliminary tension (before-natyazhiteli).

1.5.1. Seat belts

1.5.3. System of a preliminary tension of seat belts (prednatyazhitel)