1.7.12. Parking brake
At a car parking on parking, first of all, completely stop it and up to the end lift the lever of the parking brake. Then include the first transfer, if ahead lifting, or transfer of a backing of "R", if ahead descent.
For turning on of the parking brake pull up the lever, without pressing the button on the handle end.
1–pull the lever of the parking brake a little up.
2–press the button at the end of the handle.
3–lower the lever down.
When parking on a bias, turn on the parking brake and develop forward wheels towards a border on descent and from a border on lifting.
Before beginning movement, be convinced that the parking brake is switched completely off, and the control lamp of brake system does not burn.
If the car moves at not switched off parking brake, brake mechanisms can overheat that will lead to decrease in overall performance of brakes and, probably, to their exit out of operation.
Parking on a bias
Completely turn on the parking brake, and then the first transfer (if before you lifting) or transfer of a backing of "R" (if before you descent).
When parking on a bias for bigger safety enclose under car wheels lock blocks.
Parking at the working engine
Do not allow long operation of the engine in the closed or badly ventilated space. The oxide of the carbon containing in fulfilled gases has no smell, is extremely toxic and hazardous to health.
Parking lot choice
Do not put the car in such place where there are inflammable subjects, such as a dry grass, leaves, etc. as the final system with catalytic converter of the fulfilled gases heats up to very high temperature. It can cause a fire.
When the car is left without supervision, surely take out a key from the lock of ignition and lock all doors. Always try to put the car in well shined place.