Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
1.1. Car description
1.2. Keys, locks of doors and opening elements of a body
1.3. Governing bodies, kontrolnoizmeritelny devices and salon equipment
1.4. Seats
1.5. System of passive safety
1.6. Sitema of heating and conditioning
1.7. Driving and car service
1.7.1. Recommendations about a car running in
1.7.2. Fuel choice
1.7.3. Trailer towage
1.7.4. Ignition lock
1.7.5. Blocking and unblocking of a steering wheel
1.7.6. Engine start-up
1.7.7. Mechanical transmission
1.7.8. A four-high-speed automatic transmission of INVECS-II Sport Mode (with a manual mode of a choice of transfers – an intellectual and innovative control system of the car of the second generation)
1.7.9. Control lamps of AKPP
1.7.10. Positions of the lever of the selector of an automatic transmission (the main cut)
1.7.11. Features of work of an automatic transmission
1.7.12. Parking brake
1.7.13. Adjustment of height of a steering wheel
1.7.14. Tools and jack
1.7.15. Spare wheel
1.7.16. Wheel replacement
1.7.17. Wheel caps
1.7.18. Towage
1.7.19. Engine overheat
1.7.20. Engine start-up from an external source
1.7.21. Fuses
1.7.22. Replacement of lamps
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







1-7-18-buksirovka.html

1.7.18. Towage

If towage is necessary, we recommend, that it was carried out by the dealer of MITSUBISHI or professional business evacuation concern.
In the following cases make towage of the car it is possible only the wrecker: the engine works, but the car does not move, or the normal sound of operation of the engine is heard not.

Car towage by the wrecker (tractor)
Towage

ATTENTION
This car should not be towed by the wrecker with the elevating mechanism of type A (see drawing). Use of the elevating mechanism of this kind can damage a bumper and a forward part of the car.

It is impossible to tow the all-wheel drive car in situation when either lobbies or back wheels concern the earth (in drawing) It can lead type B or type C to damage of a control system of the car or its separation from the wrecker. For towage of the all-wheel drive car use the wrecker with the equipment (type D) or (type C).
If the transmission is damaged, transport the car so that driving wheels were on the towing device (the type C, D or Е) as is specified in drawing.

Towage with the lifted forward wheels (type C)
Switch off the parking brake. Establish the gear shifting lever in the neutral situation "N" (NEUTRAL).

Towage with the lifted back wheels (type B)
Establish the gear shifting lever in the neutral situation "N" (NEUTRAL).
Turn the ignition key in the situation "ASS" («The additional equipment») and fix a steering wheel a belt, a rope, etc. in situation when forward wheels are directed strictly directly (parallel to a longitudinal axis of the car). Never establish the ignition key in the situation "LOCK" ("Blocking"). It is dangerous, as there can be a blocking of a steering wheel.

Emergency towage
If towage is necessary, we recommend, that it was carried out by the dealer of MITSUBISHI or professional business evacuation concern.
Only, if it is impossible to cause evacuation service, the car can be towed temporarily off by means of a towing cable or a chain.
If towage of the car or if it tows other vehicle is necessary, pay attention to observance of the following rules and recommendations.

Car towage by other car
Towage
The forward towing hook And is located in a place specified in drawing. Attach a towing rope (cable) to a towing hook.
Before towage remove the bottom cover From a bumper.

NOTE
If to uncover a bumper, during towage it can be rumpled or damaged from contact with a towing rope (cable).
Do not use for towage a hook of Century It it is intended only for car fixing at transportation.

Use for towage of any other part of the car, except specially intended for this towing hook And, can lead to damage of a body of the car.
Try not to use for towage metal cables and ropes since they can damage a body.
If the metal towing cable is used, wrap up it a rag in contact places with the car.
Watch, that the towing cable (a rope, a chain) settled down as it is possible closer to horizontal situation that it did not damage a body.
Never try to pull out the car from a deep ditch by means of a rope (cable) as in that case the last it is impossible to arrange horizontally.
Towage
Unfasten all clamps of D. For this purpose insert a sting of a flat screw-driver into a clamp groove. Carefully hooking a clamp and operating with a screw-driver as the lever, pull out a clamp.
Remove the bottom cover of a bumper.
After the car will be towed off, establish a bumper cover into place, having executed all operations upside-down.
Leave the engine working. If the engine does not work, turn the ignition key in the situation "ASS" («The additional equipment») or «ON» ("Incl.") for an unblocking of a steering wheel.

ATTENTION
As the engine does not work, the amplifier of brakes and the pump of the hydraulic booster of a steering do not function. It means that for braking and management of a steering wheel is required bigger effort. Therefore driving becomes more difficult, than in usual (regular) conditions.

Do not leave the ignition key in the situation "LOCK" ("Blocking"). If in this situation a key to pull out from the ignition lock during movement, the steering wheel will be blocked, and the car becomes uncontrollable.
Establish the gear shifting lever in the neutral situation "N" ("NEUTRAL").
Turn on the alarm system.
During towage the reliable communication between drivers of both cars should be provided, and movement should occur with small speed.

ATTENTION
Do not allow sharp acceleration, sharp braking and abrupt turns, differently it is possible to damage towing hooks and a cable, therefore can suffer (and to be injured) surrounding people.

On long descent of a brake can overheat and lose efficiency of the work. In this case the car should be transported on the wrecker.

Towage of other car
Towage
Unfasten E.Dlya etogo's all clamps insert a sting of a flat screw-driver into a groove of a clamp and having carefully hooked a clamp, pull out it.
Remove the bottom cover of a bumper.
After the car will be towed off, establish a bumper cover into place, having executed all operations upside-down.
Towage
The back towing hook of F is located in a place specified in drawing. Attach a towing rope (cable) to a towing hook.

NOTE
Do not use for towage a hook (G). It is intended only for car fixing at transportation.

Use for towage of any other part of the car, except F specially intended for this towing hook, can lead to damage of a body of the car.
The car can be used for towage of other car of only equal or smaller weight.


1.7.17. Wheel caps

1.7.19. Engine overheat