Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
1.1. Car description
1.2. Keys, locks of doors and opening elements of a body
1.3. Governing bodies, kontrolnoizmeritelny devices and salon equipment
1.4. Seats
1.5. System of passive safety
1.6. Sitema of heating and conditioning
1.7. Driving and car service
1.7.1. Recommendations about a car running in
1.7.2. Fuel choice
1.7.3. Trailer towage
1.7.4. Ignition lock
1.7.5. Blocking and unblocking of a steering wheel
1.7.6. Engine start-up
1.7.7. Mechanical transmission
1.7.8. A four-high-speed automatic transmission of INVECS-II Sport Mode (with a manual mode of a choice of transfers – an intellectual and innovative control system of the car of the second generation)
1.7.9. Control lamps of AKPP
1.7.10. Positions of the lever of the selector of an automatic transmission (the main cut)
1.7.11. Features of work of an automatic transmission
1.7.12. Parking brake
1.7.13. Adjustment of height of a steering wheel
1.7.14. Tools and jack
1.7.15. Spare wheel
1.7.16. Wheel replacement
1.7.17. Wheel caps
1.7.18. Towage
1.7.19. Engine overheat
1.7.20. Engine start-up from an external source
1.7.21. Fuses
1.7.22. Replacement of lamps
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







1-7-22-zamena-lamp.html

1.7.22. Replacement of lamps

Replacement of lamps

Replacement of lamps

Before replacement of a lamp be convinced that it is switched off. Do not touch a flask of a new lamp barehanded. Fat from the skin, remained on glass, after heating of a lamp will evaporate, its pairs will settle on a reflector of a headlight and will make a surface of the last dim.

Capacity of lamps
The fused lamps should be replaced with new lamps of only the same capacity and the same type. Characteristics of a lamp are specified on its socle.

Replacement of a lamp of a headlight head всета
Replacement of lamps
Separate connection And.
Replacement of lamps
Remove a protective cover of Century.
Replacement of lamps
Unhook a spring of fastening of a lamp, and then take out a lamp.

ATTENTION
Do not touch a flask of a halogen lamp barehanded, dirty gloves, etc. If dirty, it it is necessary to clear a surface of a flask of a lamp alcohol, solvent for paint, etc., and to establish only after the lamp will dry.

Replacement of lamps of dimensional light
Replacement of lamps
Remove a cartridge assembled with a lamp, turning it counter-clockwise.
Extend a lamp from the boss.

Replacement of lamps of lobbies indexes of turns
Replacement of lamps
Remove each cartridge assembled with a lamp, turning them counter-clockwise. Extend a lamp from the boss.

Replacement of lamps of lateral indexes of turns
Replacement of lamps
To remove lamps of lateral indexes of turns, insert a screw-driver sting under edge of a rasseivatel and slightly wring out it.

NOTE
Wrap up a screw-driver tip a fabric not to scratch a rasseivatel and a body.

Replacement of lamps
Remove a rasseivatel assembled with a lamp, having turned it counter-clockwise. Then take out a lamp.

Replacement of a lamp of a forward antifog lamp
Replacement of lamps
Turn out screws A of fastening of a rasseyvatel and remove the lamp case.
Replacement of lamps
Press a connecting element B to disconnect and remove an antifog lamp.
Replacement of lamps
Remove a cartridge and a lamp assembled With, rotating them counter-clockwise.

NOTE
Replacement of lamps
At installation of the block of a lamp, insert the tip of a lamp of D into an opening on the case.

Replacement of lamps of a combination of back lamps
Replacement of lamps
Unscrew screws A of fastening of a back lamp from the case of the block of lamps.
Replacement of lamps
Shift the block of lamps 1 in the direction to outer side of the car and weaken fastenings of Century.
Shift the block of lamps towards a back part of the car 2 and remove fastenings of Century.
Remove each cartridge assembled with a lamp, turning them counter-clockwise. Extend a lamp from the boss.
Replacement of lamps
With – a backing lamp.
D–stoplight.
Е–back antifog lamp.
F–back marker light.

NOTE
Replacement of lamps
At installation of the block of lamps combine G clamps on the block of lamps with openings on a body.

Replacement of a lamp of a back antifog lamp
Replacement of lamps
Unfasten each of A.Dlya etogo's hairpins insert a sting of a flat screw-driver into a hairpin groove, and having carefully hooked a hairpin, pull out it.
Remove the bottom cover of a bumper of Century.
Replacement of lamps
Turn out Page bolts.
Replacement of lamps
Remove together a cartridge and a lamp assembled D, turning them counter-clockwise.
Extend a lamp.

Replacement of lamps of lamps of illumination of registration plate
Replacement of lamps
Turn out screws of fastening of a rassei-vatel of a lamp and disconnect a rasse-ivatel and the boss assembled, turning it counter-clockwise.
Take Pampas, having extended it from the boss.

Replacement of lamps of illumination of salon
Replacement of lamps
Replacement of lamps
Insert a sting of a flat screw-driver into a groove of a lamp and, having carefully hooked a rasseivatel, remove it. Take out a lamp from the boss.

NOTE
Not to scratch a rasseivatel, wrap up a screw-driver sting a fabric slice.

Replacement of a lamp of local illumination
Replacement of lamps
Insert a screw-driver into a plafond groove, and, having carefully hooked a rasseivatel, remove it.
Take out a lamp from the boss.

NOTE
Not to scratch a rasseivatel, wrap up a screw-driver sting a fabric slice.


1.7.21. Fuses

2. Engine