Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
2.1. The general procedures of check and prevention without removal of the power unit
2.2. Removal and engine installation assembled
2.3. System of cooling of the engine
2.4. Greasing system
2.4.1. Sensor switch check on pressure of engine oil
2.4.2. Removal and installation of a maslookhladitel
2.5. System of the distributed injection of fuel (MPI) of engines of a series 4G6
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 





buy dumps купить авто с пробегом цена, wall honda hyundai infiniti

2-4-2-snyatie-i-ustanovka-maslookhladitelya.html

2.4.2. Removal and installation of a maslookhladitel

Removal and installation of a maslookhladitel

Check of the perepuskny valve of a maslookhladitel
Be convinced that the valve moves smoothly, without jamming.
Removal and installation of a maslookhladitel
Check that the distance of "L" at normal to temperature (20 °C) and humidity corresponds to nominal rate.
Distance of "L" (at 20 °C): 34,5 mm.
Check that the valve stroke of "L" increases over nominal rate after the valve is shipped in the oil which has been heated up to temperature of 97-103 °C.
Distance of "L" (at 97–103 °C): 40 mm or are more.
Establish the bottom protective casings.

Removal of a maslookhladitel
Remove the bottom protective casings,
Merge engine oil.
Merge cooling liquid.
Remove a broad tank assembled.
Remove a front bumper assembled.

Installation of a maslookhladitel
Installation of details is made as it should be, the return to removal.
Establish a front bumper assembled.
Establish a broad tank assembled.
Fill in cooling liquid.
Fill in engine oil.
Establish the bottom protective casings.


2.4.1. Sensor switch check on pressure of engine oil

2.5. System of the distributed injection of fuel (MPI) of engines of a series 4G6