Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
2.1. The general procedures of check and prevention without removal of the power unit
2.2. Removal and engine installation assembled
2.3. System of cooling of the engine
2.4. Greasing system
2.5. System of the distributed injection of fuel (MPI) of engines of a series 4G6
2.5.1. General information
2.5.2. Diagnostics of system of injection of fuel
2.5.3. Technical operations on the car
2.5.4. Removal and installation of nozzles
2.5.5. Removal and installation of the case of a butterfly valve
2.5.6. Regulation system топливоподачи
2.5.7. Catching system паров fuels
2.5.8. System of a retsirkulyatsiya of the fulfilled gases (EGR)
2.5.9. Inlet and final systems
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







2-5-4-snyatie-i-ustanovka-forsunok.html

2.5.4. Removal and installation of nozzles

Removal fuel collectors/nozzles
Remove a fuel collector together with the nozzles established on it.

ATTENTION
Be careful not to drop a nozzle at removal of a fuel collector.

Installation of nozzles / regulator of pressure of fuel / fuel hose of a high pressure
Before installation put a little pure engine oil on ring laying.

ATTENTION
Be careful, do not allow oil hit in a fuel collector.

Turning to the right-to the left nozzles, a fuel hose of a high pressure and a regulator of pressure of fuel, carefully establish a fuel collector not to damage thus ring laying.
After installation check, whether the flange of a hose of a high pressure in a fuel collector smoothly turns.
If the flange of a fuel hose does not turn in a fuel collector smoothly, that, probably, there was a jamming of ring laying. In that case disconnect a hose of a high pressure from a fuel collector, insert it again into a fuel collector and check, whether the hose flange smoothly turns.
Tighten bolts of fastening of a flange of a fuel hose of a high pressure the standard moment of an inhaling, and bolts of fastening of a regulator of pressure of fuel the specified moment of an inhaling.
Inhaling moment: 9 N · m (regulator of pressure of fuel).


2.5.3. Technical operations on the car

2.5.5. Removal and installation of the case of a butterfly valve