Repair and Mitsubishi Outlander service since 2003 of release.
	1. Operation and car maintenance
	2. Engine
	3. Transmission
		3.1. The general procedures of check and prevention on the car
			3.1.1. Recommended precautionary measures
			3.1.2. Check of level of working liquid in a coupling hydraulic actuator
			3.1.3. Check of a condition of the storage battery, and its conclusions
			3.1.4. Check of plaits of wires
			3.1.5. Check of the lever of the selector
			3.1.6. Coupling check
			3.1.7. Check of operability of transmission in all ranges
			3.1.8. Check of level of oil in a transmission and a transfer case (4WD)
			3.1.9. Check of level of liquid in an automatic transmission
			3.1.10. Check of level of oil in differentials of the forward and back bridge
			3.1.11. Check of boots of power shafts on existence of damages
			3.1.12. Check of level of oil in a mechanical transmission
			3.1.13. Check of level of oil in a transfer case (4WD)
			3.1.14. Oil replacement in a mechanical transmission
			3.1.15. Oil replacement in a transfer case (4WD)
			3.1.16. Oil replacement in differential of the forward and back bridge
			3.1.17. Check of a free wheeling of a pedal of coupling
		3.2. Operations on the heated-up engine
		3.3. Coupling
		3.4. Mechanical transmission
		3.5. Automatic transmission
		3.6. Driveshaft and driving mechanism
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Appendix
	10. Electric equipment schemes

3-1-17-proverka-svobodnogo-khoda-pedali-scepleniya.html

3.1.17. Check of a free wheeling of a pedal of coupling

Measure a free wheeling of a pedal of coupling (including a free wheeling in a joint a pedal – a pin).

Standard value: 4–13 mm.

If the free wheeling of a pedal of coupling does not answer standard value, possibly at a hydraulic actuator of coupling there is an air or coupling is faulty. Therefore it is necessary to remove air from a hydraulic actuator of coupling or to make check of the coupling.

3.1.16. Oil replacement in differential of the forward and back bridge

3.2. Operations on the heated-up engine