Check of plaits of wires. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. The general procedures of check and prevention on the car
3.1.1. Recommended precautionary measures
3.1.2. Check of level of working liquid in a coupling hydraulic actuator
3.1.3. Check of a condition of the storage battery, and its conclusions
3.1.4. Check of plaits of wires
3.1.5. Check of the lever of the selector
3.1.6. Coupling check
3.1.7. Check of operability of transmission in all ranges
3.1.8. Check of level of oil in a transmission and a transfer case (4WD)
3.1.9. Check of level of liquid in an automatic transmission
3.1.10. Check of level of oil in differentials of the forward and back bridge
3.1.11. Check of boots of power shafts on existence of damages
3.1.12. Check of level of oil in a mechanical transmission
3.1.13. Check of level of oil in a transfer case (4WD)
3.1.14. Oil replacement in a mechanical transmission
3.1.15. Oil replacement in a transfer case (4WD)
3.1.16. Oil replacement in differential of the forward and back bridge
3.1.17. Check of a free wheeling of a pedal of coupling
3.2. Operations on the heated-up engine
3.3. Coupling
3.4. Mechanical transmission
3.5. Automatic transmission
3.6. Driveshaft and driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 





Цены недвижимость северный кипр узнать больше.

3-1-4-proverka-zhgutov-provodov.html

3.1.4. Check of plaits of wires

Check an azhdy plait of electric wires and the corresponding socket.
Be convinced of correctness of laying of each plait of wires and its fastening.
Check density of landing of sockets.
Check wires of a high voltage Be convinced of reliability of fastening of high-voltage wires to spark plugs, a cover of the distributor of ignition (or the sensor of provision of a cranked shaft) and ignition coils.

3.1.3. Check of a condition of the storage battery, and its conclusions
3.1.5. Check of the lever of the selector