Coupling check. Mitsubishi Outlander (since 2003 of release)

Repair and Mitsubishi Outlander service since 2003 of release.
	1. Operation and car maintenance
	2. Engine
	3. Transmission
		3.1. The general procedures of check and prevention on the car
			3.1.1. Recommended precautionary measures
			3.1.2. Check of level of working liquid in a coupling hydraulic actuator
			3.1.3. Check of a condition of the storage battery, and its conclusions
			3.1.4. Check of plaits of wires
			3.1.5. Check of the lever of the selector
			3.1.6. Coupling check
			3.1.7. Check of operability of transmission in all ranges
			3.1.8. Check of level of oil in a transmission and a transfer case (4WD)
			3.1.9. Check of level of liquid in an automatic transmission
			3.1.10. Check of level of oil in differentials of the forward and back bridge
			3.1.11. Check of boots of power shafts on existence of damages
			3.1.12. Check of level of oil in a mechanical transmission
			3.1.13. Check of level of oil in a transfer case (4WD)
			3.1.14. Oil replacement in a mechanical transmission
			3.1.15. Oil replacement in a transfer case (4WD)
			3.1.16. Oil replacement in differential of the forward and back bridge
			3.1.17. Check of a free wheeling of a pedal of coupling
		3.2. Operations on the heated-up engine
		3.3. Coupling
		3.4. Mechanical transmission
		3.5. Automatic transmission
		3.6. Driveshaft and driving mechanism
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Appendix
	10. Electric equipment schemes

3-1-6-proverka-scepleniya.html

3.1.6. Coupling check

Check coupling work at all modes of movement.

Unscrew a rug under a coupling pedal. Check size of a course of a pedal of coupling – distance between a pedal of coupling and the forward panel of a body at the pressed pedal.

Distance between the forward panel of a body and a coupling pedal, at the pressed pedal (Distance from an emphasis to an overlay of a pedal).

Nominal rate: 105 mm or more.

Check a free wheeling of a pedal of coupling.

3.1.5. Check of the lever of the selector

3.1.7. Check of operability of transmission in all ranges