Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. The general procedures of check and prevention on the car
3.2. Operations on the heated-up engine
3.3. Coupling
3.3.1. Possible malfunctions of coupling, their reason and ways of elimination
3.3.2. Removal and installation of a pedal of coupling
3.3.3. Removal and installation of a hydraulic actuator of coupling
3.3.4. Dismantling and assembly of the main cylinder of a hydraulic actuator of coupling
3.3.5. Coupling removal
3.3.6. Check
3.3.7. Dismantling and assembly of the working cylinder of a hydraulic actuator of coupling
3.4. Mechanical transmission
3.5. Automatic transmission
3.6. Driveshaft and driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







3-3-4-razborka-i-sborka-glavnogo-cilindra-gidroprivoda-scepleniya.html

3.3.4. Dismantling and assembly of the main cylinder of a hydraulic actuator of coupling

Dismantling and assembly of the main cylinder of a hydraulic actuator of coupling
Removal of details is made as it should be specified in drawing.
Installation of details is made as it should be, the return to removal.
At installation of details pay attention to operation on installation of a pusher of the main cylinder of a hydraulic actuator of coupling.
Dismantling and assembly of the main cylinder of a hydraulic actuator of coupling
Adjust length of a pusher assembled to the specified size for simplification of the subsequent adjustment of a pedal of coupling.

Check
Check the case of a hydraulic actuator of the main cylinder on absence of scratches and a rust.
Check a piston boot on lack of wear and deformation.
Check the piston on absence of scratches and a rust.
Check tubes of a hydraulic actuator of coupling on lack of a contamination.


3.3.3. Removal and installation of a hydraulic actuator of coupling

3.3.5. Coupling removal