Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. The general procedures of check and prevention on the car
3.2. Operations on the heated-up engine
3.3. Coupling
3.3.1. Possible malfunctions of coupling, their reason and ways of elimination
3.3.2. Removal and installation of a pedal of coupling
3.3.3. Removal and installation of a hydraulic actuator of coupling
3.3.4. Dismantling and assembly of the main cylinder of a hydraulic actuator of coupling
3.3.5. Coupling removal
3.3.6. Check
3.3.7. Dismantling and assembly of the working cylinder of a hydraulic actuator of coupling
3.4. Mechanical transmission
3.5. Automatic transmission
3.6. Driveshaft and driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







3-3-5-snyatie-scepleniya.html

3.3.5. Coupling removal

Coupling removal
Removal of details is made as it should be specified in the corresponding general drawing.

Removal of a fork of switching off of coupling
Move a fork of switching off of coupling in the shown direction to remove a clip from a support.

Installation of a fork of switching off of coupling
Coupling removal
Put konsistentny greasing of Mitsubishi number according to the catalog 0101011 or similar in the specified places of a fork of switching off of coupling.
Establish a fork of switching off of coupling on a support.

Installation of a conducted disk of coupling and coupling casing
Coupling removal
Put konsistentny greasing of Mitsubishi number according to the catalog 0101011 or similar on a shlitsa of a conducted disk of coupling and rub it in a shlitsa a brush.
Using directing a conducted disk of coupling, place a conducted disk of coupling on a flywheel.
Establish on a flywheel a coupling casing.


3.3.4. Dismantling and assembly of the main cylinder of a hydraulic actuator of coupling

3.3.6. Check