Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. The general procedures of check and prevention on the car
3.2. Operations on the heated-up engine
3.3. Coupling
3.4. Mechanical transmission
3.4.1. General information
3.4.2. Gear wheels and gear shifting lever
3.4.3. Differential and transmission oil
3.4.4. Removal and installation of a drive of gear shifting
3.5. Automatic transmission
3.6. Driveshaft and driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







3-4-3-differencial-i-transmissionnoe-maslo.html

3.4.3. Differential and transmission oil

The differential is connected to a transmission. It is established on two conic bearings between coupling and transmission cases. Two epiploons of different diameters condense places of an exit of shaft outside. The leading gear wheel of differential is fixed in the case and connected to gear wheels of shaft of a drive of wheels.
For greasing of details of mechanical transmissions long-term synthetic oil is provided. Unlike the engine oil in a transmission practically is not spent. If outside on a transmission there are traces потеков some no oil, means, its level did not go down. Nevertheless oil level is necessary for checking from time to time. In automatic transmissions level of working liquid can be checked only in the main transfer, level in a transmission should be checked at station of a technical obluzhivaniye by means of the special diagnostic MUT II device.

Check and repair
Oil can follow outside because of a leakage of consolidations. Check connections in the following places:
– between a transmission and the engine;
– a place of an exit of shaft from a transmission;
– stopper of a bulk opening;
– stopper of a drain opening.
All shesterenchaty knots of a transmission have very long service life. If the box fails, it is necessary for repairing in a technical center as the qualified experts by means of the special tool should carry out repair.
If you decided to carry out repair independently, consider that accuracy and very pure workplace are necessary for high-quality repair of a transmission. In addition repair will need the special tool.


3.4.2. Gear wheels and gear shifting lever

3.4.4. Removal and installation of a drive of gear shifting