Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. The general procedures of check and prevention on the car
4.1.1. Check of pressure of air in tires (including a spare wheel)
4.1.2. Check of a suspension bracket of the car on existence of damages and the weakened fixing elements
4.1.3. Check of unevenness of wear of tires
4.2. Tires and wheels
4.3. Peredny Bridge
4.4. Forward suspension bracket
4.5. Back suspension bracket
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







4-1-2-proverka-podveski-avtomobilya-na-nalichie-povrezhdenijj-i-oslablennykh-krepezhnykh-ehlementov.html

4.1.2. Check of a suspension bracket of the car on existence of damages and the weakened fixing elements

Check of a suspension bracket of the car on existence of damages and the weakened fixing elements
Be convinced of reliability of an inhaling of bolts and suspension bracket nuts.
If are used шплинты, be convinced of correctness of their installation.
1. Top lever, bottom lever.
2. Stabilizer of cross-section stability of the car.
3. Telescopic rack

Removal of limiters of springs of a forward suspension bracket
Check of a suspension bracket of the car on existence of damages and the weakened fixing elements
Remove limiters of a course of springs of a forward suspension bracket, having established the car on the lift and having lifted it to a full speed of a release of a suspension bracket

ATTENTION
These limiters should be removed during preselling preparation of the car. Otherwise, at a trip on the car the discomfort will be felt.

Check of a suspension bracket of the car on existence of damages and the weakened fixing elements
Check nuts of a steering trapeze and them шплинты. Visually and to the touch check an inhaling of nuts of a steering trapeze and correctness of installation шплинтов.
Check lateral and average steering drafts. Check a condition lateral and average steering drafts – whether погнуты they, whether nuts of fastening of drafts are tightened.
Check a condition of nuts of fastening of the forward bridge and a nut of an axis of back wheels and them шплинты.
Check a condition and existence of damages of an anticorrosive covering from the car bottom.
Stock-taking люфта in spherical plugs of a suspension bracket and damages on boots
Check of a suspension bracket of the car on existence of damages and the weakened fixing elements
Lift the car.
Disconnect the stabilizer of cross-section stability from the bottom lever.
Move up – down the bottom lever hands for the purpose of check excessive люфта the spherical plug in the axial direction. If at the spherical plug is present люфт, replace the bottom lever assembled.

Stock-taking of damages on boots
Check existence of damages on boots.

Check of boots of power shafts on existence of damages
Check of a suspension bracket of the car on existence of damages and the weakened fixing elements
Check boots of power shafts on existence of damages.


4.1.1. Check of pressure of air in tires (including a spare wheel)

4.1.3. Check of unevenness of wear of tires