Check of effort of turn of a steering wheel at the motionless car. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. A steering with the hydraulic booster
5.2. The general procedures of check and prevention on the car
5.2.1. Check of a free wheeling and check of an angle of rotation of a steering wheel
5.2.2. Check of the moment of the beginning of a provorachivaniye of the spherical hinge of a tip of steering draft
5.2.3. Check of effort of turn of a steering wheel at the motionless car
5.2.4. Check of self-return of a steering wheel in the provision of rectilinear movement
5.2.5. Check of level of working liquid in system
5.2.6. Replacement of working liquid in system
5.2.7. Air removal from system
5.2.8. Test of the hydropump of system for developed pressure
5.2.9. Check of the sensor switch of pressure of the hydraulic booster of a steering
5.2.10. Check of a protective cover of the spherical hinge of a tip of steering draft
5.2.11. Check of the power absorbing mechanism of a steering column assembled
5.2.12. Removal and installation of a steering wheel
5.2.13. Removal and installation of a shaft of a steering column
5.2.14. Removal and installation of the hydropump of the amplifier of a steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







5-2-3-proverka-usiliya-povorota-rulevogo-kolesa-pri-nepodvizhnom-avtomobile.html

5.2.3. Check of effort of turn of a steering wheel at the motionless car

Establish the car on a horizontal surface with an equal covering, turn of a steering wheel establish operated wheels in the provision of rectilinear movement.
Start the engine and leave it to idle.
Nominal rate: 750 + 100 mines-1.
Attach a spring dynamometer to an external circle of a steering wheel and measure the effort necessary for its turn from provision of rectilinear movement on the left and to the right (within 1,5 turns). Thus also pay attention to absence of change of spent effort at turn of a steering wheel.
Nominal rate: the effort spent for turn of a steering wheel no more than 29 N.
Tolerance: no more than 5,9 N.
If the measured value surpasses nominal rate, check and replace the corresponding details.


5.2.2. Check of the moment of the beginning of a provorachivaniye of the spherical hinge of a tip of steering draft

5.2.4. Check of self-return of a steering wheel in the provision of rectilinear movement