Check of level of working liquid in system. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. A steering with the hydraulic booster
5.2. The general procedures of check and prevention on the car
5.2.1. Check of a free wheeling and check of an angle of rotation of a steering wheel
5.2.2. Check of the moment of the beginning of a provorachivaniye of the spherical hinge of a tip of steering draft
5.2.3. Check of effort of turn of a steering wheel at the motionless car
5.2.4. Check of self-return of a steering wheel in the provision of rectilinear movement
5.2.5. Check of level of working liquid in system
5.2.6. Replacement of working liquid in system
5.2.7. Air removal from system
5.2.8. Test of the hydropump of system for developed pressure
5.2.9. Check of the sensor switch of pressure of the hydraulic booster of a steering
5.2.10. Check of a protective cover of the spherical hinge of a tip of steering draft
5.2.11. Check of the power absorbing mechanism of a steering column assembled
5.2.12. Removal and installation of a steering wheel
5.2.13. Removal and installation of a shaft of a steering column
5.2.14. Removal and installation of the hydropump of the amplifier of a steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







5-2-5-proverka-urovnya-rabochejj-zhidkosti-v-sisteme.html

5.2.5. Check of level of working liquid in system

Establish the car on an equal, horizontal surface.
Start the engine, several times turn a steering wheel to lift temperature of working liquid in system to 50–60 °C.
At the working engine, turn several times at full capacity a steering wheel to the left and to the right.
Check, whether there is no foaming or a dairy shade of working liquid in a tank of the hydraulic booster. Check a difference in levels of working liquid at the working and idle engine. If this difference more than 5 mm are necessary air removal from system of the amplifier of a steering.


5.2.4. Check of self-return of a steering wheel in the provision of rectilinear movement

5.2.6. Replacement of working liquid in system