Replacement of working liquid in system. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. A steering with the hydraulic booster
5.2. The general procedures of check and prevention on the car
5.2.1. Check of a free wheeling and check of an angle of rotation of a steering wheel
5.2.2. Check of the moment of the beginning of a provorachivaniye of the spherical hinge of a tip of steering draft
5.2.3. Check of effort of turn of a steering wheel at the motionless car
5.2.4. Check of self-return of a steering wheel in the provision of rectilinear movement
5.2.5. Check of level of working liquid in system
5.2.6. Replacement of working liquid in system
5.2.7. Air removal from system
5.2.8. Test of the hydropump of system for developed pressure
5.2.9. Check of the sensor switch of pressure of the hydraulic booster of a steering
5.2.10. Check of a protective cover of the spherical hinge of a tip of steering draft
5.2.11. Check of the power absorbing mechanism of a steering column assembled
5.2.12. Removal and installation of a steering wheel
5.2.13. Removal and installation of a shaft of a steering column
5.2.14. Removal and installation of the hydropump of the amplifier of a steering
6. Brake system
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 





the impossible quiz

5-2-6-zamena-rabochejj-zhidkosti-v-sisteme.html

5.2.6. Replacement of working liquid in system

Lift and fix forward wheels of the car.
Disconnect a returnable hose and put on it a vinyl hose and merge working liquid in capacity.
Disconnect sockets of the coil of ignition.
At an engine prokruchivaniye a starter, turn several times at full capacity a steering wheel to the left and to the right to merge the remains of working liquid from system.
Connect into place a returnable hose and fix a clamp.
Fill a tank with recommended working liquid between labels "MOVE" and «MIN», then remove air from system.
Recommended working liquid: ATF DEXRON III or DEXRON II.

5.2.5. Check of level of working liquid in system
5.2.7. Air removal from system