Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. The general procedures of check and prevention on the car
6.2.1. Check of level of working liquid in a hydraulic actuator of brakes
6.2.2. Check of free and working courses of the lever of the parking brake
6.2.3. Check люфта in bearings of forward naves
6.2.4. Stock-taking of leaks in tubes and hoses of brake system
6.2.5. Check of a brake disk
6.2.6. Check and adjustment of a pedal of a brake
6.2.7. Check of operation of the return valve
6.2.8. Check of work of a regulator of pressure of back brakes
6.2.9. Check of the sensor of level of brake liquid
6.3. Parking brake
6.4. Anti-blocking system of brakes (ABS – 2WD)
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







6-2-2-proverka-svobodnogo-i-rabochego-khodov-rychaga-stoyanochnogo-tormoza.html

6.2.2. Check of free and working courses of the lever of the parking brake

Lever type
Check of free and working courses of the lever of the parking brake
Pull the lever of the parking brake with effort about 200 N and count number of clicks.
Check of free and working courses of the lever of the parking brake
Standard value: 4–5 clicks.

Pedal type
Check of free and working courses of the lever of the parking brake
If the working course of the lever of the parking brake is distinct from the recommended size, adjust it on the procedure specified below.
Remove the floor console.
Weaken an adjusting nut, having released a cable.
Check of free and working courses of the lever of the parking brake
Press a pedal of the parking brake with effort about 200 N.
Recommended value: 1–2 clicks.
If the working course of a pedal of the parking brake is distinct from the recommended size, adjust it on the procedure specified below.
Remove caps of adjusting openings on back brake mechanisms. Insert a shlitsevy screw-driver, and rotate it in the direction specified by an arrow, for the purpose of cultivation of brake shoes till rigid fixing of a brake disk. Unscrew an adjusting nut of the brake mechanism on five labels back.
Adjustment of the parking brake make according to recommended value, turn of an adjusting nut. After completion of adjustment, be convinced of lack of a free wheeling between the lever and an adjusting nut.

ATTENTION
If a working course of the lever of the parking brake less than the recommended size, brake shoes can "take" a disk.

Check of free and working courses of the lever of the parking brake
After completion of adjustment of a course of the parking brake, lift a back part of the car and twist back wheels to be convinced of absence of contact between a brake disk and a block.
Check of free and working courses of the lever of the parking brake
Weaken an adjusting nut, having unscrewed it till the end of a cable core, having provided a cable a free wheeling.
Remove caps of adjusting openings on back brake mechanisms. Insert a shlitsevy screw-driver, and rotate it in the direction specified by an arrow, for the purpose of cultivation of brake shoes, till rigid fixing of a brake disk. Unscrew an adjusting nut of the brake mechanism on five labels back.
Adjustment of the parking brake make according to recommended value, turn of an adjusting nut. After completion of adjustment, be convinced of lack of a free wheeling between a pedal and an adjusting nut.

ATTENTION
If a working course of the lever of the parking brake less than the recommended size, brake shoes can "take" a disk.

After completion of adjustment of a course of the parking brake, lift a back part of the car and twist back wheels to be convinced of absence of contact between a brake disk and a block.


6.2.1. Check of level of working liquid in a hydraulic actuator of brakes

6.2.3. Check люфта in bearings of forward naves