Repair and Mitsubishi Outlander service since 2003 of release.
	1. Operation and car maintenance
	2. Engine
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
		6.1. General information
		6.2. The general procedures of check and prevention on the car
			6.2.1. Check of level of working liquid in a hydraulic actuator of brakes
			6.2.2. Check of free and working courses of the lever of the parking brake
			6.2.3. Check люфта in bearings of forward naves
			6.2.4. Stock-taking of leaks in tubes and hoses of brake system
			6.2.5. Check of a brake disk
			6.2.6. Check and adjustment of a pedal of a brake
			6.2.7. Check of operation of the return valve
			6.2.8. Check of work of a regulator of pressure of back brakes
			6.2.9. Check of the sensor of level of brake liquid
		6.3. Parking brake
		6.4. Anti-blocking system of brakes (ABS – 2WD)
	7. Onboard electric equipment
	8. Body
	9. Appendix
	10. Electric equipment schemes

6-2-3-proverka-lyufta-v-podshipnikakh-perednikh-stupic.html

6.2.3. Check люфта in bearings of forward naves

Disconnect a support of the brake mechanism of a forward wheel and, without disconnecting a brake hose, suspend a support nearby to a wheel nave.

Remove a brake disk from a nave.

Fix the indicator of hour type, as is shown in drawing. Measure axial люфт in the nave bearing, moving it forward-back.

Limiting value: 0,05 mm.

If the size axial люфта exceeds admissible value, replace a nave assembled.