Check of operation of the return valve. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. The general procedures of check and prevention on the car
6.2.1. Check of level of working liquid in a hydraulic actuator of brakes
6.2.2. Check of free and working courses of the lever of the parking brake
6.2.3. Check люфта in bearings of forward naves
6.2.4. Stock-taking of leaks in tubes and hoses of brake system
6.2.5. Check of a brake disk
6.2.6. Check and adjustment of a pedal of a brake
6.2.7. Check of operation of the return valve
6.2.8. Check of work of a regulator of pressure of back brakes
6.2.9. Check of the sensor of level of brake liquid
6.3. Parking brake
6.4. Anti-blocking system of brakes (ABS – 2WD)
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







6-2-7-proverka-raboty-obratnogo-klapana.html

6.2.7. Check of operation of the return valve

Remove a vacuum hose.

ATTENTION
Thus it is not necessary to disconnect the return valve from a vacuum hose.

Check operation of the return valve, using the vacuum pump.


ATTENTION
If the return valve is faulty, replace it assembled with a vacuum hose.


6.2.6. Check and adjustment of a pedal of a brake

6.2.8. Check of work of a regulator of pressure of back brakes