Removal and installation of the lever of the parking brake. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. The general procedures of check and prevention on the car
6.3. Parking brake
6.3.1. Extra earnings of brake slips
6.3.2. Removal and installation of the lever of the parking brake
6.3.3. Removal and installation of brake slips and drum-type mechanism
6.3.4. Removal and installation of the main brake cylinder and vacuum amplifier of brakes
6.3.5. Removal and installation of disk brakes
6.3.6. Dismantling and assembly of a disk brake
6.3.7. Dismantling and assembly of a back drum-type brake
6.4. Anti-blocking system of brakes (ABS – 2WD)
7. Onboard electric equipment
8. Body
9. Appendix
10. Electric equipment schemes
 







6-3-2-snyatie-i-ustanovka-rychaga-stoyanochnogo-tormoza.html

6.3.2. Removal and installation of the lever of the parking brake



Additional operations after installation
Adjust a working course of the lever of a drive of the parking brake.
Establish an arm of the back console and the back console assembled.

Removal and installation of a cable of the parking brake
Remove the back console in collecting and an arm of the back console.
Remove pillows of a back seat assembled.
Rotation of an adjusting nut weaken a working course of a drive of the parking brake.
Remove details in an order specified in drawing.

Additional operations after installation
Adjust a working course of the lever of a drive of the parking brake.
Establish pillows of a back seat assembled.
Establish an arm of the back console and the back console assembled.


6.3.1. Extra earnings of brake slips

6.3.3. Removal and installation of brake slips and drum-type mechanism