7-2-6-snyatie-i-ustanovka-generatora.html
7.2.6. Removal and generator installation
The operations which are carried out before removal of the generator
Remove a protective casing.
Remove a cross-section beam of racks of a forward suspension bracket.
Remove a driving belt.
Remove the air filter.
The operations which are carried out after installation of the generator
Establish the air filter.
Establish a driving belt.
Establish a cross-section beam of racks of a forward suspension bracket.
Adjust a tension of a driving belt.
Establish a protective casing.
Removal of cables of a choice and gear shifting and arm of fastening of cables
Unscrew a bolt of fastening of an arm of cables (cables are fixed on an arm), remove cables and an arm of cables.
Removal of generating installation
After removal of bolts and nuts of fastening of the generator shift the generator towards a transmission. Removal of generating installation is made up, through a gap formed by a transmission and an inlet collector.
|