Speedometer check. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. Power supply system
7.3. Electrostart-up system
7.4. Ignition system
7.4.1. General information
7.4.2. The operations of maintenance which are carried out directly on the car
7.4.3. Removal of oscillograms of a high voltage with oscillograph use
7.4.4. Examples of oscillograms of a high voltage of faulty system of ignition
7.4.5. Check of the relay of the coil of ignition
7.4.6. Removal and installation of coils of ignition
7.4.7. Removal and installation of the sensor of provision of a camshaft
7.4.8. Removal and installation of the sensor of a detonation
7.4.9. Removal and installation of the lock of ignition
7.4.10. Speedometer check
7.4.11. Tachometer check
7.4.12. Fuel level sensor check
7.5. Lighting system
7.6. Heater, conditioner and ventilation system
8. Body
9. Appendix
10. Electric equipment schemes


7.4.10. Speedometer check

Adjust pressure of air in tires to nominal rate.
Place the car on running drums and substitute an emphasis under back wheels.
On purpose to avoid shift of forward wheels here and there, put on towing hooks of the car two extensions which ends reliably fix on anchor plates.
For prevention of movement of the car forward a back towing hook put on reliably fixed chain or a cable.
Check a scale of measurements at the high-speed stand and its compliance to nominal rates of speed.

Do not release sharply a coupling pedal. Do not allow sharp increase/decrease in speed in the course of test.

Nominal rates

7.4.9. Removal and installation of the lock of ignition

7.4.11. Tachometer check