Removal and installation of forward fog lights. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. General information
7.2. Power supply system
7.3. Electrostart-up system
7.4. Ignition system
7.5. Lighting system
7.5.1. Removal and installation of a headlight of head light
7.5.2. Removal and installation of the switch of the proof-reader of headlights
7.5.3. Removal and installation of forward fog lights
7.5.4. Removal and installation of switches of forward fog lights and back antifog lamp
7.5.5. Removal and installation of a back antifog lamp
7.5.6. Removal and installation of lateral repeaters of turn
7.5.7. Removal and installation of the back combined lamp
7.5.8. Removal and installation of the top stoplight
7.5.9. Removal and installation of lamps of illumination of registration plate
7.5.10. Removal and installation of the switch of the alarm system
7.5.11. Removal and installation of the podrulevy combined switch
7.6. Heater, conditioner and ventilation system
8. Body
9. Appendix
10. Electric equipment schemes
 







7-5-3-snyatie-i-ustanovka-perednikh-protivotumannykh-far.html

7.5.3. Removal and installation of forward fog lights

For removal of a lamp of a lobby 3 fog lights 2 turn it counter-clockwise.

ATTENTION
At replacement of a forward fog light use only original spare parts.
Hold a lamp only for its plastic or metal case. Do not touch a glass part of a lamp barehanded, dirty gloves, etc. If the glass surface of a lamp became soiled, it is necessary for clearing alcohol, carefully to dry up and only then to establish.

Installation of details is made as it should be, the return to removal.


7.5.2. Removal and installation of the switch of the proof-reader of headlights

7.5.4. Removal and installation of switches of forward fog lights and back antifog lamp