Check of a course of the external handle of a lateral door. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged and decorative elements of a body
8.2.1. Removal and installation of a front bumper
8.2.2. Dismantling and assembly of a front bumper
8.2.3. Removal and installation of a rear bumper
8.2.4. Removal and front grille installation
8.2.5. Removal and installation of overlays of wings
8.2.6. Removal and installation of moldings
8.2.7. Removal and installation of a molding of a threshold
8.2.8. Removal and installation of a protective film of a frame of glass of a lateral door
8.2.9. Removal and installation of a back spoiler
8.2.10. Removal and installation of support of a luggage carrier of a roof
8.2.11. Cowl adjustment
8.2.12. Adjustment of the hatch of a jellied mouth of a fuel tank
8.2.13. Adjustment of forward and back lateral doors
8.2.14. Adjustment of glass of a lateral door
8.2.15. Check of a course of the external handle of a lateral door
8.2.16. Current check in a chain of the electric drive of a window regulator
8.2.17. Removal and cowl installation
8.2.18. Removal and installation of a lateral door assembled
8.2.19. Removal and installation of the lock and handle of a lateral door
8.2.20. Removal and installation of a back door assembled
8.2.21. Removal and installation of the lock and handle of a back door
8.2.22. Removal and installation of the hatch of a roof
8.2.23. Removal and installation of a lateral rear-view mirror
9. Appendix
10. Electric equipment schemes
 







8-2-15-proverka-khoda-naruzhnojj-ruchki-bokovojj-dveri.html

8.2.15. Check of a course of the external handle of a lateral door

Check compliance of a course "And" the external handle of a door to nominal rate.

Nominal rate "And"
Forward door: the nominal rate of 3,9 mm or is less.
Recommended value: 1,9 mm.
Back door: the nominal rate of 3,6 mm or is less.
Recommended value: 1,6 mm.
If the size of a course of the external handle of a door does not correspond to nominal rate, check, and in case of need replace, the external handle of a door or the door lock assembled.

Check of a course of the internal handle of opening of a lateral door
Check compliance of a course "In" internal handles of a door to nominal rate.

Nominal rate "In"
Door of the driver: nominal rate: 9,3–17,7 mm.
Recommended value: 13,9 mm.
Except a door of the driver: nominal rate: 3,8–12,2 mm.
Recommended значениея: 8,4 mm.
If the size of a course of the internal handle of a door does not correspond to nominal rate, check, and in case of need replace, the internal handle of a door or the door lock assembled.

Check of a course of the internal button of blocking of the lock of a lateral door
Remove door facing assembled.
For check of a course of the internal button check compliance of distance "And" to nominal rate at various positions of the internal button.

Nominal rate "And"
When blocking: 3–5 mm.
At an unblocking (a forward door): 18–20 mm.
At an unblocking (a back door): 11–19 mm.
If the size "And" does not correspond to nominal rate, adjust it moving of the end of a cover of a cable.

Check of a course of the external handle of a back door
Check compliance of a course "And" the external handle of a door to nominal rate.
Nominal rate "And": 2,3 mm.
If the size of a course of the external handle of a door does not correspond to nominal rate, remove the bottom facing of a back door.
Remove the holder of draft of the external handle of a door and adjust a course of the external handle moving draft of the external handle of a door.


8.2.14. Adjustment of glass of a lateral door

8.2.16. Current check in a chain of the electric drive of a window regulator