Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged and decorative elements of a body
8.2.1. Removal and installation of a front bumper
8.2.2. Dismantling and assembly of a front bumper
8.2.3. Removal and installation of a rear bumper
8.2.4. Removal and front grille installation
8.2.5. Removal and installation of overlays of wings
8.2.6. Removal and installation of moldings
8.2.7. Removal and installation of a molding of a threshold
8.2.8. Removal and installation of a protective film of a frame of glass of a lateral door
8.2.9. Removal and installation of a back spoiler
8.2.10. Removal and installation of support of a luggage carrier of a roof
8.2.11. Cowl adjustment
8.2.12. Adjustment of the hatch of a jellied mouth of a fuel tank
8.2.13. Adjustment of forward and back lateral doors
8.2.14. Adjustment of glass of a lateral door
8.2.15. Check of a course of the external handle of a lateral door
8.2.16. Current check in a chain of the electric drive of a window regulator
8.2.17. Removal and cowl installation
8.2.18. Removal and installation of a lateral door assembled
8.2.19. Removal and installation of the lock and handle of a lateral door
8.2.20. Removal and installation of a back door assembled
8.2.21. Removal and installation of the lock and handle of a back door
8.2.22. Removal and installation of the hatch of a roof
8.2.23. Removal and installation of a lateral rear-view mirror
9. Appendix
10. Electric equipment schemes
 







8-2-18-snyatie-i-ustanovka-bokovojj-dveri-v-sbore.html

8.2.18. Removal and installation of a lateral door assembled

Removal and installation of a lateral door assembled

Removal
Removal of details is made in an order specified in drawing.
Before the beginning of removal of details execute remove facing of a threshold of a door and forward lateral facing.

Installation
Removal and installation of a lateral door assembled
Installation of details is carried out as it should be, the return to removal.
Establish a clamp of the lock of a door so that the deviation of its central line of rather central line of a reciprocal part of the lock of a door did not exceed 1,5 mm.
After completion of installation of details establish facing of a threshold of a door and forward lateral facing.
Execute door adjustment.

Check of the trailer switch of a lateral door
Removal and installation of a lateral door assembled
Check that the chain is closed between any conclusion of the socket and the switch case when the button of the switch is released ("VKL".) (resistance less than 2 Ohm).
Check that the chain is opened between any conclusion of the socket and the case when the button of the switch is pressed ("VYKL").

Installation back bottom directing glasses
Reliably insert back bottom directing glasses in back directing glasses.

Installation of the internal handle of opening of a door
For installation of a cable of blocking of the handle of opening of a door (a forward door) or drafts of blocking of the handle of opening of a door (a back door) establish the internal button of blocking of the lock of a door in situation "is BLOCKED".
After completion of installation of details execute check of a course of internal and external handles of a door.
Establish a water-proof film of a door.
Establish door facing.


8.2.17. Removal and cowl installation

8.2.19. Removal and installation of the lock and handle of a lateral door