Removal and installation of the lock and handle of a back door. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged and decorative elements of a body
8.2.1. Removal and installation of a front bumper
8.2.2. Dismantling and assembly of a front bumper
8.2.3. Removal and installation of a rear bumper
8.2.4. Removal and front grille installation
8.2.5. Removal and installation of overlays of wings
8.2.6. Removal and installation of moldings
8.2.7. Removal and installation of a molding of a threshold
8.2.8. Removal and installation of a protective film of a frame of glass of a lateral door
8.2.9. Removal and installation of a back spoiler
8.2.10. Removal and installation of support of a luggage carrier of a roof
8.2.11. Cowl adjustment
8.2.12. Adjustment of the hatch of a jellied mouth of a fuel tank
8.2.13. Adjustment of forward and back lateral doors
8.2.14. Adjustment of glass of a lateral door
8.2.15. Check of a course of the external handle of a lateral door
8.2.16. Current check in a chain of the electric drive of a window regulator
8.2.17. Removal and cowl installation
8.2.18. Removal and installation of a lateral door assembled
8.2.19. Removal and installation of the lock and handle of a lateral door
8.2.20. Removal and installation of a back door assembled
8.2.21. Removal and installation of the lock and handle of a back door
8.2.22. Removal and installation of the hatch of a roof
8.2.23. Removal and installation of a lateral rear-view mirror
9. Appendix
10. Electric equipment schemes
 







8-2-21-snyatie-i-ustanovka-zamka-i-ruchki-zadnejj-dveri.html

8.2.21. Removal and installation of the lock and handle of a back door


Removal
Remove an overlay of a threshold of a back door.
Remove the bottom facing of a back door.
Remove a water-proof film of a door.
Removal of details is made in an order specified in drawing.

Installation
At installation of details pay attention to operation of removal of a clamp of the lock of a door.
Establish a clamp of the lock of a door so that the deviation of its central line of rather central line of a reciprocal part of the lock of a door did not exceed 1,5 mm.
After completion of installation of details check a course of the external handle of a back door.
Establish a water-proof film of a door.
Establish the bottom facing of a back door.
Establish an overlay of a threshold of a back door.


8.2.20. Removal and installation of a back door assembled

8.2.22. Removal and installation of the hatch of a roof