Removal and installation of the hatch of a roof. Mitsubishi Outlander (since 2003 of release)
Repair and Mitsubishi Outlander service since 2003 of release.
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged and decorative elements of a body
8.2.1. Removal and installation of a front bumper
8.2.2. Dismantling and assembly of a front bumper
8.2.3. Removal and installation of a rear bumper
8.2.4. Removal and front grille installation
8.2.5. Removal and installation of overlays of wings
8.2.6. Removal and installation of moldings
8.2.7. Removal and installation of a molding of a threshold
8.2.8. Removal and installation of a protective film of a frame of glass of a lateral door
8.2.9. Removal and installation of a back spoiler
8.2.10. Removal and installation of support of a luggage carrier of a roof
8.2.11. Cowl adjustment
8.2.12. Adjustment of the hatch of a jellied mouth of a fuel tank
8.2.13. Adjustment of forward and back lateral doors
8.2.14. Adjustment of glass of a lateral door
8.2.15. Check of a course of the external handle of a lateral door
8.2.16. Current check in a chain of the electric drive of a window regulator
8.2.17. Removal and cowl installation
8.2.18. Removal and installation of a lateral door assembled
8.2.19. Removal and installation of the lock and handle of a lateral door
8.2.20. Removal and installation of a back door assembled
8.2.21. Removal and installation of the lock and handle of a back door
8.2.22. Removal and installation of the hatch of a roof
8.2.23. Removal and installation of a lateral rear-view mirror
9. Appendix
10. Electric equipment schemes
 







8-2-22-snyatie-i-ustanovka-lyuka-kryshi.html

8.2.22. Removal and installation of the hatch of a roof


Removal
Remove ceiling facing.
Remove forward lateral facing.
Removal of details is made in an order specified in drawing.

Installation
Installation of details is carried out as it should be, the return to removal.
At installation of details pay attention to installation of a drainage hose.
Establish the rubber plug and provide a vystupaniye of a drainage hose on the size specified in drawing.
After completion of installation of details execute adjustment of the hatch and check tightness of the hatch.
Execute initialization of the electronic control unit by the hatch.
Establish forward lateral facing.
Establish ceiling facing.

Check of the switch of the electric drive of the hatch
Check a chain condition between socket conclusions at various positions of the switch.
Check that the chain is closed only between conclusions «4» – «5», when the switch in the situation "OPEN" (resistance less than 2 Ohm).
Check that the chain is opened by conclusions «3» – «4», «3» – «5», «3» – «6», «4» – «5», «4» – «6» and «5» – «6», when the switch in the situation "OFF".
Check that the chain is closed only between conclusions «3» – «4», when the switch in the situation "UP" (resistance less than 2 Ohm).
Check that the chain is closed only between conclusions «4» – «6», when the switch in the situation "CLOSE/DOWN" (resistance less than 2 Ohm).


8.2.21. Removal and installation of the lock and handle of a back door

8.2.23. Removal and installation of a lateral rear-view mirror